No. Although it has “chlorine” in its name, this solution has a different chemistry. This solution is much safer and gentler than bleach and many other antiseptics and antimicrobials, plus it remains effective under organic load. Furthermore, this solution is much more eco-friendly as it breaks down to a simple salt, producing no harmful by-products; whereas chlorine bleach produces harmful by-products to the environment including: trihalomethanes (THM) and haloacetic acids (HAAS).
- Not all disinfectants are created equal. When evaluating and comparing disinfectant products, take a close look the ingredient list. Vital Oxide uses a unique chemical compound called chlorine dioxide. While other competitors and manufacturers have attempted to copy and produce a form of stabilized chlorine dioxide similar to Vital Oxide, this revolutionary formula is simply unequaled.
- Chlorine Dioxide has been used to purify drinking water, to kill MRSA in schools and hospitals, during Anthrax attacks, and in the aftermath of Hurricane Katrina. Vital Oxide gives you peace of mind knowing that you are using an effective product that does not come with alarming safety warnings and precautions. It is a safer chemical to use around people, pets, and the environment. It has a Safety Data Sheet of 0-0-0, the safest rating possible.
Cleaning removes germs, dirt, and impurities from surfaces and objects. It works by using soap (or detergent) and water to physically remove germs from surfaces. It does not necessarily kill germs, but by removing them, it lowers their numbers and the risk of spreading infection. There is a risk of cross-contamination (e.g. the mopping solution and the cleaning tools could be spreading disease in the absence of a disinfectant).
Sanitizing lowers the numbers of germs, but is meant to reduce, not kill, the occurrence and growth of bacteria, viruses, and fungi. Sanitizing is more effective than cleaning alone but the reduction of pathogen populations on environmental surfaces is exponentially better when you disinfect.
Disinfecting kills germs on surfaces or objects. It needs to be EPA and Health Canada approved. There are 3 types: limited, general, and hospital grade. Disinfectant products are put through rigorous testing to prove their efficacy and measure toxicity
Limited: Must be supported by efficacy testing against either Salmonella choleraesuis or Staphylococcus aureus. Limited disinfectants are found mostly in household use.
General: Must be supported by efficacy testing against both Salmonella choleraesuis and Staphylococcus aureus. General disinfectants are used in commercial areas.
Hospital grade: Must be supported by AOAC Use Dilution or AOAC Germicidal Spray efficacy testing against Salmonella choleraesuis, Staphylococcus aureus, and Pseudomonas aeruginosa. The bacteria Pseudomonas aeruginosa hides behind biofilm and is difficult to eliminate. Killing this bacterium is required for “Hospital grade Disinfectant”.
In some cases, yes, but this depends on how dirty the surface is. The dirtier the surface, the less effective the disinfectant is. Disinfectants need to contact the area to disinfect and cannot do this effectively with a barrier of dirt or grime in the way. Once the dirt has been wiped away, the disinfectant can get to work. Under lightly soiled conditions, you can clean and disinfect in the same step with just Vital Oxide. (NOTE: EPA requires all disinfectants carry the following label direction: “For heavily soiled areas, a pre-cleaning step is required.”).
When used according to the label instructions, Vital Oxide has been authorized by Health Canada and approved by the EPA (Environmental Protection Agency) for use against SARS-CoV-2, the virus that causes COVID-19 and its variants. Genetic changes to the virus do not impact the efficacy of Vital Oxide. The difficulty of killing a virus depends on its physical features, and the recent mutations to SARS-CoV-2 have not changed the basic physical properties.Vital Oxide has been tested to kill 99.9% of SARS-Cov-2, the virus that causes COVID-19 on hard, nonporous surfaces in just 5 minutes.
A food-contact sanitizer, at minimum, reduces the level of Staphylococcus aureus and Escherichia coli by 99.999% on a food contact surface within one minute. A potable water rinse is not allowed after sanitation of a food contact surface.
It is a safety rating given by NSF (National Sanitation Foundation) International. The NSF testing guidelines are a continuation of the USDA product approval and listing program, including the FD 1. Vital Oxide is rated “no rinse required on food contact surfaces: category DS, meaning Vital Oxide is approved for use in commercial and residential kitchens to control bacteria, viruses, and mold without the need to wash/rinse the area with water after Vital Oxide is applied.
A plastic pump should be used. Do not use metal.
Store in original closed container in a cool, dry place away from heat and open flame. Do not allow the product to become overheated in storage. Avoid prolonged storage temperature above 40°C or 90°F. This may cause increased degradation of the product, which will decrease product effectiveness.
In some cases, Vital Oxide can discolour certain fabrics. It is recommended to always test for colour fastness a small, inconspicuous spot before treating the entire article. In one instance, there was a report of a child’s clothing being discoloured after sitting in a school bus seat that was sprayed with Vital Oxide. In this case, the seats were not completely dry before being occupied. In the process of multiple applications in a short period of time a buildup of Vital Oxide can also contribute to discolouration, especially if the seats were previously treated with bleach. This is easily address by a spray and wipe step to remove buildup of product.
Using a fogger allows you to spray a large amount of solution, have more coverage, all while using less chemicals compared to a traditional sprayer. Testing by Victory Innovations found that the Cordless Electrostatic System is 70% faster and uses 65% less chemicals than a traditional sprayer. This increase in efficiency will save you a lot of time and money.
Electrostatic is based on the principle that opposite charges attract and like charges repel. Two positively charged things will repel each other. Using this natural electrostatic phenomenon, our foggers have cordless application technology. The Minion and Terminator foggers are equipped with Negative-ion electrostatic technology and ionize the air while spraying.
Negative ions neutralize positively charged airborne particles (e.g. dust, pollen, viruses, bacteria, fungal particulates, etc.), which then settle down on the surface. The disinfectant liquid being sprayed then covers the surfaces and kills those airborne pathogens as well. This dual-action technology not only disinfects the surfaces, but also purifies the surrounding air.
The Victory Gun and Backpack foggers are equipped with Positive-ion electrostatic technology and charge the disinfection solution with positive ions, allowing them to wrap conductive surfaces with an effective and even coverage. Double-charged particles envelope all conductive surfaces – shadowed, vertical, and underneath.
It depends on the chemical being used. If you use our disinfectant, Vital Oxide, then no wiping or rinsing is required after application.
Adjusting the nozzle allows you to control the size of the droplets being sprayed. This can be beneficial for use with different solutions, different surfaces, and when there are different dwell times.
It depends on the fogger you are using. One of our smaller foggers, the Minion, has an optimum range of 5-10 feet; whereas one of our larger foggers, the Terminator, has an optimum range of 35-45 feet. Please view the “Specifications” section under the “Products” page for spray distance on each of our foggers.
It is recommended to clean the foggers each time you change the solution being used inside of the unit. Simply spray warm water through the fogger for approximately 20 seconds to rinse out the line of any leftover chemicals that may start to build up.
It is also recommended to clean the foggers if you notice the device is not performing optimally, such as the nozzle being plugged. In this case, remove the nozzle, soak in hot, soapy water for 10 minutes, then blow out the nozzle with compressed air.
Our Air Purifiers are more sophisticated and have a premium filtration system and create more air flow movement. This combination results in drastically improved air cleaning efficiency. Additionally, the quality of our products not only makes them more effective, but longer lasting.
Other benefits of our air purifiers include low noise, increased reliability, lower operating costs, easy replacement of filters, and no toxic off-gassing or ozone production. Generally, other units are less sophisticated and lower quality; thus, they are not as effective and will be more costly in the long run.
Although there are some different features on each of these units, the main difference is that the Cascade is a much larger unit that can move more air and is designed for commercial use. The Jade Air Purifier is a much smaller unit and is suitable for both residential and commercial use.
The Cascade Air Purifier is equivalent to running 2x60 W light bulbs.
Not directly as the Jade and Cascade Air Purifiers do not have heating or cooling components. They do however circle the air within a room which may have some indirect positive effects on indoor air temperature and humidity.
Our Jade and Cascade Air Purifiers are independently lab tested and certified to be in compliance with UL standard 867 and CSA standard C22.2 No. 187-M1986 by ETL and beats the ETL and CETL mark under report No. 3035728.005.
The Jade and Cascade Air Purifiers clean the air by means of the superior 6—stage filtration system and its large airflow capacity. The more air that you move through the Air Purifier, the more you clean the air. Therefore, you should adjust the air flow based on the level of cleaning you desire. The higher the airflow, the “cleaner” your indoor air will be. Alternatively, you may set the Jade Air Purifier to the Automatic Mode so it will automatically adjust the speed settings depending on how much particulates it is detecting in the air.
Yes. The 6-stage filtration is always working at its maximum effectiveness whenever the unit is operating, and the more air flow through the room and the unit, the more the air gets clean”. When open windows create air flow currents, it helps to circulate the air through the room and spreads the clean air out faster and allows the dirty air to get to the Air Purifier more easily.
Air purification is generally an invisible operation. However, our clients tell us that they notice and feel the difference (e.g. they find the air to be fresher and lighter, they feel more energized, they see less dust on surfaces, etc.). You will also notice how well the unit is working when you clean the pre-filter, which is often black with dirt even from rooms whose air seems relatively clean.For a more scientific measurement, a particle counter can be used or you may conduct a professional air quality assessment to verify that the number of particles or level of toxins in the room air is dramatically reduced after using the Jade or Cascade Air Purifier.
Yes. The Jade and Cascade Air Purifiers are designed to and built for continuous use to continuously clean the air. We encourage our customers to leave their Air Purifier on at all times to achieve the healthiest living environment possible.
The Jade and Cascade Air Purifiers are some of the quietest medical and commercial grade systems on the market. The unique sound dampening design allows the Air Purifier to move a large capacity air flow at whisper quiet levels.
The JADE Air Purifier is <30 dB on the low setting, and <55 dB on the high setting (*measured at 6 feet).
The CASCADE Air Purifier is <45 dB on the low setting, and <55 dB on the high setting.55 dB is similar to most kitchen dishwashers.
The negative ions not only refresh the air, but they also have positive psychological health benefits, improve productivity, and overall well-being.Studies show that negative ions increase the flow of oxygen to the brain, which results in positive effects (e.g. improved mental energy, higher mental alertness, decreased drowsiness, etc.). Furthermore, people with winter and chronic depression that were placed in air with a higher concentration of negative ions had improved their depression as much as antidepressants, without the negative side effects associated with taking drugs.
The Jade and Cascade Air Purifiers both have indicators on the control panel. There is no guesswork involved. Each element is easy to clean or change as required, and each unit is designed to have very few parts to replace which keeps the annual cost very low.The time between cleanings will vary depending on how long you run the unit each day and how dirty the indoor air is.
For the best quality of life, the air that we breathe must be the purest air possible because air nourishes with oxygen the lungs, blood, and organs. Indoor air is often polluted with volatile organic compounds, ozone, sulphur dioxide, household chemicals, nitrogen oxides, carbon monoxide, radon, tobacco smoke, etc. These air pollutants often cause allergies, asthma, respiratory tract issues, and can be very harmful to health.The SAM400 is a medical-grade unit that kills airborne pathogens, eliminates particulates, removes airborne odour and VOCs to ensure the shared air people breathe is cleaner and safer.
It’s a third of the cost and is much smaller in size compared to similar high-CFM air purifiers. However, it’s much more than air purification, as it provides whole room air disinfecting competition.
It uses a fraction of the power consumption compared to similar products. It uses about as much power as an average ceiling fan with a standard 110-120 V outlet (standard Canada electrical outlets).
One fixture covers approximately 2,000 sq. ft.
Calculator here
Lorem ipsum dolor sit amet, consectetur adipiscing elit.